Bumpers
Corner/Continuous Bumpers
Grey corner bumpers with matching strip bumpers provide 100% protection to the full perimeter of equipment. Strip bumpers are made with flat steel inserts for permanent attachment. Inserts in strip bumpers are not predrilled. They can be easily cut to size with a hacksaw and drilled as needed.
Temperature Range: -45°F to 180°F
Model
Number |
Steel Inserts |
Length |
Width |
Thickness |
Mounting Holes |
| Long Side |
Short Side |
| 06926 |
Insert
Pre-drilled |
6-3/16" |
3-1/16" |
1-1/2" |
1-1/8"-1-3/4" |
2(17/64") in 6" side
1(17/64") in 3" side |
| 9.6930* |
Insert |
Specify (16 ft. max., 1 ft. inc.) |
1-1/2" |
1" |
– |
| 66930 |
No Insert |
Specify (50 ft. inc.) |
1-1/2" |
1" |
– |
| 06906 |
Insert |
2-5/8" each side |
1-1/8" |
1" |
2(13/64") each side |
| 9.6914* |
Insert |
Specify (16 ft. max., 1 ft. inc.) |
1-1/8" |
1" |
– |
| 66914 |
No Insert |
Specify (50 ft. inc.) |
1-1/8" |
1" |
– |
| 06905 |
Insert
Pre-drilled |
2-1/2" each side |
3/4" |
3/4" |
2(1/8") each side |
| 9.6913* |
Insert |
Specify (20 ft. max., 1 ft. inc.) |
3/4" |
5/8" |
– |
| 66913 |
No Insert |
Specify (50 ft. inc.) |
3/4" |
5/8" |
– |
*Strip bumper with insert available in 10, 12, 16 and 20 ft. pre-cut lengths. Conuslt Factory.
End Bumpers
Generally used on the ends of tubular handles. Available in 3-1/4" and 1-3/4" diameters. Easily attached, they are soft enough to absorb noise and shock and hard enough to wear for years.
Model
Number |
Diameter |
Hole
Diameter |
Thickness |
| 06901 |
3-1/4" |
11/32" |
7/8" |
| 06901.01 |
1-3/4" |
9/32" |
1/2" |
Corner Bumpers
A heavy duty bumper with an extra rounded buildup on the apex of the corner where shocks and wear are greatest. Ends are tapered and rounded. Each side is 3" long and 1-1/8" wide at the base.
Model
Number |
Thickness at
Corner |
Thickness at
Ends |
Mounting Holes |
| 06927 |
1-5/16" |
1" |
2(3/16") on each side |